Page 1 of 1

Failing WA emissions test (Test results inside)

PostPosted: Fri Jan 28, 2011 9:03 pm
by Gordongk
In WA you can punch in any WA license plate number and see the results of it's emissions tests at:

http://emissiontestwa.com/e/TestRecordSearch.aspx

I just found this today on their site and thought it would be a cool thing to share.

The link below is the results of my full built b16a turbo hatch failing emissions because the idle was too high, and I was running a bit rich. I haven't been tested since then, but am going to re-dyno tune my car before I retest. I should pass afterwards.

http://emissiontestwa.com/e/TestRecord. ... 10:20%20AM

PostPosted: Fri Jan 28, 2011 9:25 pm
by Ajax1989
wow so they failed you at idle

thats gay

here in cali we do a 15mph and a 25 mph test

but ur car runs good at the 25mph test
iirc the 2525 is 25mph at 25% load