trans question
Posted: Mon May 18, 2009 12:10 amaight since most didnt like my last post i have a question, converting from auto to manual, how expensive am i going to be looking at?
Page 1 of 1
Posted: Mon May 18, 2009 12:10 amPosted: Mon May 18, 2009 1:17 amthat all depends on how you do it. You can either just get a auto to manual mount, or you can cut off the auto mount on the frame and weld in the manual mount.
Posted: Mon May 18, 2009 1:33 amthanks for the info where can i find an auto to manual mount?
Posted: Mon May 18, 2009 4:04 amhasport
Posted: Mon May 18, 2009 12:48 pmPosted: Mon May 18, 2009 9:01 pmthanks dudes
Posted: Tue May 19, 2009 2:18 amwhich is cheaper? the mount or the welding?
Posted: Tue May 19, 2009 2:37 amthe welding if you know someone... but the mount is so much easier and you can't really mess it up.
I would do the mount before I welded (and I have a welder) It's faster and you don't have to worry about re-painting and rusting down the road.
I would do the mount before I welded (and I have a welder) It's faster and you don't have to worry about re-painting and rusting down the road.