Civic EG

Posted: **Tue May 05, 2009 4:54 am**

while my car was at the paint shop, fixing some electrical problem caused when they put the rear part of the car together, a fuse melted so i was without lights in the tail and in the interior, while in the shop, my HID where stolen so i had to drive my car in the dark back home only with the fogs i installed in this week, so i did not had the chance of testing them in the night and i noticed they are like a luxury only, cuz i cant see nothing with them in the dark!

Is there a way to adjust the light beam to go higher?

PD: The paint shop is going to pay for my HID, i wanted to put 3,000k instead of the 8,000k i had, so now i don't need to buy a new pair of bulbs :hehe:

Posted: **Tue May 05, 2009 8:45 am**

you can take out the little reflectors that are in front of the bulb it'll be alot brighter

Posted: **Thu May 07, 2009 1:32 am**

is there a tutorial or something to know a bit what i am doing?

Posted: **Fri May 15, 2009 12:43 pm**

post pic of the foglight up. is it the oem fog kit or aftermarket kit you installed?

Posted: **Fri May 15, 2009 4:45 pm**

if its a OEM or OEM style, then yes, you can adjust them. there are adjustment screws on the back of the housing. much like the head light adjustments.

Posted: **Fri May 15, 2009 6:22 pm**

Greasedmonkey wrote:if its a OEM or OEM style, then yes, you can adjust them. there are adjustment screws on the back of the housing. much like the head light adjustments.

wait if you have to adjust them from the rear, how will you know if they are level and aimed properly, cause you'd have to take the bumper off wouldn't ya? or are they accessable from the front by removing the cover?

Posted: **Fri May 15, 2009 7:54 pm**

The fogs i have for my EG8 you take the face plate off and you can see the adjusting screw right in front of you. Hope that helps. (they arnt OEM but they are the replicas)

Posted: **Fri May 15, 2009 10:49 pm**

Gorveatt wrote:
Greasedmonkey wrote:if its a OEM or OEM style, then yes, you can adjust them. there are adjustment screws on the back of the housing. much like the head light adjustments.

wait if you have to adjust them from the rear, how will you know if they are level and aimed properly, cause you'd have to take the bumper off wouldn't ya? or are they accessable from the front by removing the cover?

i believe you take the cover off of them.

Posted: **Thu May 21, 2009 10:51 pm**

thanx, i will try that, mine are oem style

Posted: **Thu May 21, 2009 10:58 pm**

Greasedmonkey wrote:
i believe you take the cover off of them.

correct

Posted: **Sat May 30, 2009 10:16 pm**

got my car back just about an hour ago, and removed the cover, and didn't see any screw, is it possible to post a picture of where it is?

Posted: **Sun May 31, 2009 2:47 am**

refer to this thread.

http://civic-eg.com/viewtopic.php?t=2657

Civic EG

is there a way to adjust fog's light beam?

is there a way to adjust fog's light beam?