Civic EG

Posted: **Sun Mar 29, 2009 9:05 am**

how would i go about getting the exterior window trim off so i can respray it :shock:

Posted: **Sun Mar 29, 2009 2:35 pm**

you have to take of the interior door panel, then you can get access to the back of the clips that hold on the trim.

Posted: **Sun Mar 29, 2009 6:13 pm**

Be forewarned that you're going to break each and every one of those clips.

Posted: **Sun Mar 29, 2009 8:09 pm**

suspendedHatch wrote:Be forewarned that you're going to break each and every one of those clips.

I didn't

I only broke one. On both sides.

Posted: **Sun Mar 29, 2009 9:03 pm**

thanks for the advice, if i do brake a clip will i have to replace the whole trim or just the clip itself

Posted: **Sun Mar 29, 2009 9:17 pm**

just the clip itself but their like 2.50 each so dont go crazy on it

Posted: **Sun Mar 29, 2009 9:20 pm**

suspendedHatch wrote:Be forewarned that you're going to break each and every one of those clips.

how true.

Posted: **Mon Mar 30, 2009 1:12 pm**

Heres the pt# for the dr belt molding clips.
91510-SR3-003
hope that helps. :thumb:

Exterior Window Trim