Civic EG

Posted: **Tue Oct 28, 2008 3:47 am**

hello im new to this site and i was wondering if i can use a 99 gsr wire harness on my eg i got a chipped p28 ready for a gsr or do have to use my stock harness

Posted: **Wed Oct 29, 2008 2:06 pm**

im not sure, but wouldnt the 99 harness be wired for obd2? if so, it wont work without an obd2 to obd1 conversion......but im not sure

Posted: **Wed Oct 29, 2008 9:32 pm**

it can work. you'll have a few more extra plugs laying around

Posted: **Thu Oct 30, 2008 12:56 am**

99 harness is OBD2 and P28 is OBD1 so no, it wont work.

Posted: **Tue Nov 04, 2008 6:51 am**

get a jumper harness

Posted: **Tue Nov 04, 2008 8:40 am**

suspendedHatch wrote:99 harness is OBD2 and P28 is OBD1 so no, it wont work.

use a obd1 chassis harness but obd2 engine harness. you will need to add vtec to your chassis harness as well as knock sensor, and butterfly valves wire.

http://technet.ff-squad.com/hybrid.92-95.obd2.htm

A U.S. 96-01 integra engine wire harness is a MUST for this type of swap!
This is a key ingredient in getting an OBD2 engine to work in an OBD1 vehicle. The ever so clever Honda engineers were cool enough to make the US OBD2 Integra/Delsol engine wire harnesses backwards-compatible with OBD1 vehicles.

Posted: **Wed Nov 05, 2008 6:59 pm**

thanks guys i got it to work with the gsr harness i had to redo the injectors cuz they were cut and tapped but car works fine

Posted: **Sun Dec 14, 2008 10:26 pm**

:thumb: yeah 93 to 2001 egine harness

Posted: **Tue Jan 06, 2009 9:24 am**

DC4rob wrote:it can work. you'll have a few more extra plugs laying around

Thats what she said

Civic EG

can i use a 99 gsr wire harness on my eg

can i use a 99 gsr wire harness on my eg