Suppose to do that?
Posted: Wed Jul 23, 2008 7:05 pmMy a/c compressor when i get on the gas stops and then resumes but squeals in between every gear shift? How do i get it to stop squealing?
Page 1 of 1
Posted: Wed Jul 23, 2008 7:05 pmPosted: Wed Jul 23, 2008 8:43 pmMy best guess is a new belt : D
Posted: Wed Jul 23, 2008 9:05 pm
maybe belts are too tight?
Posted: Thu Jul 24, 2008 2:55 ami just replaced my belt??
Posted: Thu Jul 24, 2008 4:38 ammaybe to0 tight
Posted: Thu Jul 24, 2008 5:42 pmWhat is the tension supposed to be? or do I just loosen the bolt a little?
Posted: Thu Jul 24, 2008 5:54 pmwhen i changed my belt it did that squeking noise....all becuase i didnt tighten it enough...after tighten it jus a little it stopped....maybe loosen the tensioner jus a little to see if it works...installing the belts too tight or too loose will make that sound...as ofr the tension, check out the haynes manual or the honda manual, they show the length of how tight/loose u should have in your belt
Posted: Thu Jul 24, 2008 9:09 pmcool thanks bro.
Posted: Mon Jul 28, 2008 11:33 pmIf im not mistaken the deflection on the belt should be about an inch. Take a ruler and go to the beltand measure the distance from the belt being level to the furthest distance you can push it. That is your deflection. Im pretty sure that it should be about 1 in.