Plug wires on an EG Si Underdash fusebox
Posted: Sat Jun 21, 2008 1:31 amSup EG owners. I bought a totaled EG Si off a friend for 500 bones (Motor, trans, full interior...) the whole car was straight other than the front was crashed and the airbags went off. I also bought a Dx shell to put all the shit in. On the DX, the wiring harness was all cut up so i took it out and replaced it with the Si harness. After i put it in and hooked everything up, i noticed that there was an extra spot for a plug on the backside of the underdash fusebox. There were no extra plugs other than like cruise control and stuff that wasnt hooked up. And when i looked at the rear harness ( the one for rear lights and fuel pump etc.) from the Si.... It had the Plug... I dont feel like wiring the whole back harness, so im wondering if this extra plug is needed.... It only consists of one Yel/Blk wire that runs right into the one of the three plugs. And it is supposed to run to the Back of the fusebox. Any incite would be appreciated
