Civic-EG.com Forum 3.3.1

- Wed Sep 30, 2015 2:12 am #356261 Here is what I think I need. OBD1

1. Stock EG hatch feed and return lines (not B18)
2. B18C power steering pump
3. B18C vtech/LS lower bracket B16 vtech upper bracket (I have a B16 head)
4. B16 or B18 reservoir
5. B16/B18 steel oil cooler loop

Am I missing anything?

[suspendedHatch]

- Thu Oct 08, 2015 7:05 am #356530 OBD1 B series pump
Del Sol B16 PS upper mounting bracket and belt
B series lower PS bracket

If your hatch didn't come with power steering, then you need all the power steering parts. Rack, lines, reservoir.

- Thu Oct 15, 2015 5:24 pm #356691 Thanks. With the EG high pressure feed line work with the B18 pump?

[suspendedHatch]

- Sat Oct 17, 2015 3:03 am #356817 If they're both OBD1.

- Fri Oct 23, 2015 12:42 am #357010 Has anyone seen a real difference when adding a reservoir to a power steering rack that was looped? My EG has a 3 way loop. One feed and 2 returns.

[suspendedHatch]

- Fri Oct 23, 2015 6:53 pm #357134 There's no reason to have a reservoir. Drain all the fluid out and plug all the holes. Dem0nk1d just did this on his coupe. He ground the ends off the bolts and welded them shut, then sanded them smooth. Looks clean.