- Sun Jul 19, 2015 9:33 pm
#354797
Just trying to see if anyone has any tips on how to fix warped quarters.
I welded on new panels from fixmyrust but seemed to have heated the welded area too much while grinding. Now the welding area seems to be receding.
I have heard it can be banged out with a hammer and dolly but it is quite a hard place to reach from inside.
Any ideas would help!
I welded on new panels from fixmyrust but seemed to have heated the welded area too much while grinding. Now the welding area seems to be receding.
I have heard it can be banged out with a hammer and dolly but it is quite a hard place to reach from inside.
Any ideas would help!