Civic-EG.com Forum 3.3.1

- Sat Aug 23, 2014 12:17 pm #348205 Hi guys....
I bought a new suspension for my car and thats not fit in my lower control arm...

- Sat Aug 23, 2014 12:17 pm #348206 because my lower control arm is this.


and i think it will fit to this


and this...( but it's for civic 96-00 (ek) )


Thats my problem if I buy the second and third one can I install it on my car??
is it fit on my car?

thanks.

- Mon Aug 25, 2014 7:05 am #348224 are you sure you have a 92 hatch? My control arms look like the other 2.
do you have pics of you rears?

Live Calm, Act Fast
my Build thread- http://civic-eg.com/viewtopic.php?t=28495

- Mon Aug 25, 2014 8:13 am #348226 the first pix is the LCA for JDM EG ...which is also what EGs in Malaysia gets.

2nd one is for USDM EG ...

i may be wrong... but thats the impression i get after trolling the internet for a few years... hehehe

suspension... what u have is probably for the USDM LCAs and also EKs.

u could buy aftermarket LCAs if OEM isnt available to u.. most aftermarket LCAs cater for the USDM LCA... id recommend hardrace as the cheapest... or go all out and get some badass Function7 LCAs.

[suspendedHatch]

- Mon Aug 25, 2014 5:45 pm #348235 Yeah, the first set are only found on ITRs and some old EFs. I have them on my car because I swapped over ITR suspension.

You can exchange your suspension for an ITR application, get the LCAs from picture two (make sure they have the threaded hole for swaybar end links), or get aftermarket LCAs.