Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
User avatar
By rickshatch
#325793 i just bought my first eg and it is a vx with drum brakes. i have a rear disk brake setup from a 90 crx si. can i use this on my 94. thanks for any replies
User avatar
By Civic_HatchSI
#325859 As far as I know it works as long as you use the 92-95 SI ebrake cables.
User avatar
By rickshatch
#326340 they are on my 89 hatch. i used brake cables for a integra so they should be ok right.
By wakkjobb
#328186 Along with park-brake cables there's the proportion valve to get from whatever car you got the rear discs from.

Info:
http://www.d-series.org/forums/suspensi ... n-how.html

Not exactly the same as yours, but it's in the right direction.

Huge bunch of info:
http://www.d-series.org/forums/suspensi ... guide.html

I picked up a set of rear arms from a 94 Si hatch to put on my 92 DX someday; if you can, replace the bushings while you're in there and the arms are off the car. It's a whole lot easier that way.

>>Dan
User avatar
By asianrob
#328196 integra E brake lines are going to be too long. you'll need it for a EG hatch.
User avatar
By rickshatch
#328205 found some brakes from a del sol. so i am going to use those and keep my ef together
User avatar
By Apexracing
#328208
rickshatch wrote:found some brakes from a del sol. so i am going to use those and keep my ef together


Make sure to grab the brake master cylinder from that sol, along with the brake booster.
User avatar
By kt95CiviCDX
#328221 I have the 91 crx si rear disc on my eg8 and i used the ebrake cables from the eg8 ex...they work perfect