Integra Seats

Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
 Reply
User avatar

Integra Seats

By Crabloc93
- Wed Jan 16, 2013 6:52 am #324222 Will 94-01 Integra seats bolt right into my 93 DX Hatch? If so, does it matter what trim the Integra is? I heard of people doing this before, but I wanted to get some feedback before I go to the junkyard and get seats.
User avatar

By asianrob
- Wed Jan 16, 2013 7:52 am #324223 it bolts right in.

By HeikDiesel
- Wed Jan 16, 2013 2:18 pm #324230 Courtesy of projEKtjokes via utahhondas.com

92-95 CIVIC:
-Front-
•92-97 Del Sol
•94-01 Integra
•96-00 Civic w/EG rails
•97-01 Prelude w/EG rails
•97-02 Accord Coupe w/EG rails
•01-05 Civic*EM2 Only w/EG rails
•01-03 CL w/EG rails*Requires 12v for heat feature
User avatar

By asianrob
- Fri Jan 18, 2013 7:45 am #324356
HeikDiesel wrote:Courtesy of projEKtjokes via utahhondas.com

92-95 CIVIC:
-Front-
•92-97 Del Sol
•94-01 Integra
•96-00 Civic w/EG rails
•97-01 Prelude w/EG rails
•97-02 Accord Coupe w/EG rails
•01-05 Civic*EM2 Only w/EG rails
•01-03 CL w/EG rails*Requires 12v for heat feature


Del sol's dont exactly bolt in unless you use civic rails, but i have seen people just use the 3 holes that line up.

By HeikDiesel
- Fri Jan 18, 2013 1:50 pm #324365 Sure about that? Had Del Sol seats in my hatch and pretty sure they had the factory rails on them and all 4 bolted right up.
User avatar

By asianrob
- Fri Jan 18, 2013 6:40 pm #324388
HeikDiesel wrote:Sure about that? Had Del Sol seats in my hatch and pretty sure they had the factory rails on them and all 4 bolted right up.


real sure about that.

i had to change the rails out every time.

3 bolts only line up.

plus there are plenty of discussions about the rail swaps.

and just a few links

http://clubeg6.com/forum/viewtopic.php?f=13&t=17328

http://jdmuniverse.com/forums/honda-civ ... to-eg.html

and link to pics of the rails and alignment

http://honda-tech.com/showthread.php?t=327716

so NO the Del sol seats DO NOT BOLT IN. i've done it plenty of times.

you can cut the rail and make a slot and make it work but thats too much of a hassle.
User avatar

By suspendedHatch
- Fri Jan 18, 2013 7:11 pm #324392 Should note that this thread applies to fronts only.

By HeikDiesel
- Fri Jan 18, 2013 7:39 pm #324394 Cool, good info to have

By MG6
- Thu Feb 07, 2013 11:43 pm #325851 Nice. gotta find me some teg front seat for my dad's vx. :thumb:

By MG6
- Tue Feb 12, 2013 6:21 am #326265 :thumb:
User avatar

By suspendedHatch
- Wed Feb 20, 2013 11:26 pm #326949
thenewvessel wrote:Just make sure to use the EG rails lol


?
User avatar

By noname87
- Tue Mar 12, 2013 1:27 pm #328438 92-95 prelude seats also require an EG rail. i just used the 3 holes that line up. a little modification of the inside rail can get them to bolt completely in though
 Reply
Return to Chassis - Hatchback