Civic-EG.com Forum 3.3.1

- Thu Sep 20, 2012 4:56 pm #316091 i removed my plastic wheel wells because my car is low and they were all torn up so they rubbed, but now it seems when driving in the rian i have water coming from somewhere near the fuse box near my feet

- Thu Sep 20, 2012 5:14 pm #316092 Check the door seal. My hatch was missing the splash gaurds i dont however get water in my car. But by removing the splash guards you are throwing all the water, dirt, and grime on the road onto your door hinges and stuff.

- Sat Sep 22, 2012 12:28 pm #316237 Also the openings near that area need to be sealed.
Cruise control plug fits those areas.
I would highly recommend replacing the fenderwells. You can cut them if your slammed to prevent rubbing. It keeps everything much cleaner.

Stock is gay, like blowing richard simmons in a porta potty at a elton john concert.

- Mon Sep 24, 2012 4:05 pm #316345 any idea where i can get new ones?

dealer?

[teal_dx]

- Mon Sep 24, 2012 4:52 pm #316347 1aAuto has them: http://www.1aauto.com/1A/Weatherstrip/H ... 49577/1993

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Sep 24, 2012 5:05 pm #316349

1aAuto has them: http://www.1aauto.com/1A/Weatherstrip/H ... 49577/1993

Sorry teal I ment the splash guards or whatever their called lol

[teal_dx]

- Mon Sep 24, 2012 6:38 pm #316358 They might not have those... You can PM 1ACarlos or make a post in their section on the forum - Carlos is usually on here daily

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Tue Sep 25, 2012 1:41 am #316390 you can find them on ebay.

http://www.ebay.com/itm/92-95-94-93-HON ... f5&vxp=mtr