Civic EG

Any body know how to install side moldings on an eg that dosnt have the holes for them

Is there a logical reason why you want to install them? The holes for the clips are square and then there is one bolt for the long strip down the door. There would be quite a bit of labor involved to cut all those holes unless you buy used parts from a car that came with them

I thought that there were also side moldings that applied with double sided tape = no drilling.

get some 3m double sided, badass tape. do NOT drill. you'll run the risk of severe RUST.

Password JDM sells the stick on thin side moulding kits

hmm, never seen the tape ones, good info guys

JUICE wrote:Password JDM sells the stick on thin side moulding kits

Yes and if anything! look up 3M tape. and get the right one that is for Body and resists heat peeling and chemicals. ! they have it just cant think of the right one right now

DTR808 wrote:Any body know how to install side moldings on an eg that dosnt have the holes for them

buy new doors, or junk yard

...

and there is such a thing as the sticky side moldings that are the thin jdm moldings. its called TAPE and the other is called CLIP


http://www.passwordjdm.com/sitemap/p/Pa ... e-1321.htm

Buying new doors won't help. Then he has to buy new fenders AND cut holes in rear qp

EH2_andy wrote:Buying new doors won't help. Then he has to buy new fenders AND cut holes in rear qp

oh yeah huh....sorry

thanks for the feed back guys i didnt know about those tape ones ill look them up on password