- Wed Sep 12, 2012 7:41 pm
#315545
Any body know how to install side moldings on an eg that dosnt have the holes for them
- Thu Sep 13, 2012 5:21 pm
#315616
Is there a logical reason why you want to install them? The holes for the clips are square and then there is one bolt for the long strip down the door. There would be quite a bit of labor involved to cut all those holes unless you buy used parts from a car that came with them
- Thu Sep 13, 2012 5:59 pm
#315619
I thought that there were also side moldings that applied with double sided tape = no drilling.
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Thu Sep 13, 2012 6:48 pm
#315623
get some 3m double sided, badass tape. do NOT drill. you'll run the risk of severe RUST.
2007 Honda Civic Si
- Thu Sep 13, 2012 6:51 pm
#315624
Password JDM sells the stick on thin side moulding kits
- Thu Sep 13, 2012 8:26 pm
#315639
hmm, never seen the tape ones, good info guys
- Thu Sep 13, 2012 8:27 pm
#315640
Yes and if anything! look up 3M tape. and get the right one that is for Body and resists heat peeling and chemicals. ! they have it just cant think of the right one right now
JUICE wrote:Password JDM sells the stick on thin side moulding kits
Yes and if anything! look up 3M tape. and get the right one that is for Body and resists heat peeling and chemicals. ! they have it just cant think of the right one right now
Team XXX Racing/WGHonda
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294
- Sun Sep 23, 2012 11:37 pm
#316290
buy new doors, or junk yard
...
and there is such a thing as the sticky side moldings that are the thin jdm moldings. its called TAPE and the other is called CLIP
http://www.passwordjdm.com/sitemap/p/Pa ... e-1321.htm
DTR808 wrote:Any body know how to install side moldings on an eg that dosnt have the holes for them
buy new doors, or junk yard
...
and there is such a thing as the sticky side moldings that are the thin jdm moldings. its called TAPE and the other is called CLIP
http://www.passwordjdm.com/sitemap/p/Pa ... e-1321.htm
- Mon Sep 24, 2012 2:25 am
#316307
Buying new doors won't help. Then he has to buy new fenders AND cut holes in rear qp
2007 Honda Civic Si
- Mon Sep 24, 2012 2:58 am
#316309
EH2_andy wrote:Buying new doors won't help. Then he has to buy new fenders AND cut holes in rear qpoh yeah huh....sorry