Page 1 of 1
adding vtec to my non vtec cx
Posted:
Fri Aug 17, 2012 1:51 amby soy_ponchito
hey guys i bought a 92 cx its my first build.. im going to swap its crappy d15 to a b16 can any one help with some real detail info on how to do electrical?
p.s can i keep the a/c if i make that swap?
Posted:
Fri Aug 17, 2012 3:34 amby teal_dx
You can keep AC
For the electrical, you'll only need to run 3 wires to the ECU for vtec.
Posted:
Fri Aug 17, 2012 5:13 amby elrompetoto
teal_dx wrote:You can keep AC
For the electrical, you'll only need to run 3 wires to the ECU for vtec.
depends if u tun the ecu u can make it pop by just running the vtec wire
Posted:
Fri Aug 17, 2012 9:31 amby asianrob
no need to wire for Vtec its a 92 its already prewired. just need OBD1 Vtec harness and plug everything in. you'll need to wire for 4 wire O2 sensor if i remember right.
Posted:
Fri Aug 17, 2012 2:58 pmby elrompetoto
Tru tru but uck the o2 when u get the ecu chip turn the 02 off
Posted:
Fri Aug 24, 2012 5:47 pmby ThatguyInAhatch
you lucked out, vtec is already wired in your harness. all you gotta do is get a p28 or vtec ecu and motor, plug it in and you sir, are good to go.
Posted:
Sat Aug 25, 2012 4:26 amby Apexracing
elrompetoto wrote:Tru tru but uck the o2 when u get the ecu chip turn the 02 off
There is no need to tune when your running the correct ecu for the motor. If he plans on building the motor or getting a turbo then yea he might want to look at hondata s300.