- Wed Jul 04, 2012 6:37 pm
#310122
Hi guys Im considering this conversion as i have both cars and need to what's involved and any additional parts i need to make this b16 fit my hatch. [/u]
- Wed Jul 04, 2012 9:32 pm
#310130
seems like you have everything you need right there now you just need time and are both manual??
- Wed Jul 04, 2012 9:46 pm
#310134
Yes both are manual. Just a case of swapping it in? The esi is a UK hatch, del sol sir a jap
- Thu Jul 05, 2012 3:47 am
#310149
since you are getting a Del Sol Sir you'll need an integra shift linkage 99-00 SI also the 96-98 B16 Civic should also work and you need to make sure that Del sol is OBD1 which is 92-95 it its obd2 you'll need to convert the engine to obd1 dizzy, harness and ecu, and maybe a sensor or 2. and maybe mounts if the 96+ del sol's are different.
ron_nirvana wrote:Yes both are manual. Just a case of swapping it in? The esi is a UK hatch, del sol sir a jap
since you are getting a Del Sol Sir you'll need an integra shift linkage 99-00 SI also the 96-98 B16 Civic should also work and you need to make sure that Del sol is OBD1 which is 92-95 it its obd2 you'll need to convert the engine to obd1 dizzy, harness and ecu, and maybe a sensor or 2. and maybe mounts if the 96+ del sol's are different.
92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe
- Tue Jul 17, 2012 10:52 am
#311197
The del sol is a 92 so imagine its obd1. Won't a civic vti or sir gear linkage work ?
- Tue Jul 17, 2012 6:12 pm
#311255
Chrono shows in his Del Sol build thread how he converted standard B series shift linkage to fit his Del Sol.
See page 4 of his build thread where he added 2" to each linkage arm.
http://www.civic-eg.com/viewtopic.php?t ... c&start=45
See page 4 of his build thread where he added 2" to each linkage arm.
http://www.civic-eg.com/viewtopic.php?t ... c&start=45