Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
User avatar
By EGCiviCKid
#304663 hi guys

i have just dropped a b16a2 in my lsi and i have started to hook up the power steering.
i have the b16 pump and brackets and was under the impression i just have to hook the d series lsi power steering hose up? although it doesn't fit :cry:

do i need a b series hose? or should it fit?

thanks!
User avatar
By blk92hb
#304686 If I am thinking right you are putting in a ek b16a, if that's so you will need a 92-95 b16a pump the 96and up uses a bigger line, or you can use a ek or Integra line from a 96 and up. But I don't know if the thread pitch is the same on the rack and pinion.
User avatar
By EGCiviCKid
#304739
blk92hb wrote:If I am thinking right you are putting in a ek b16a, if that's so you will need a 92-95 b16a pump the 96and up uses a bigger line, or you can use a ek or Integra line from a 96 and up. But I don't know if the thread pitch is the same on the rack and pinion.


http://www.ebay.co.uk/itm/Honda-Civic-C ... 58934668a4

will this work with my original hose then?
and yes i got the b16 out of an EK4 :thumb:
By bsnizzle
#305273 i'd ditch the power steering, makes ya arms stronger lol.