Civic-EG.com Forum 3.3.1

- Fri Apr 20, 2012 8:07 pm #302434 was wondering what would be needed to fit the eyelet style coilies on to an eg ?
would I need the lca??? anything else?
thanks in advance

" If in doubt..... Flat Out " - Colin McRae (GRHS)

- Sun Apr 22, 2012 6:29 pm #302583 Nope type R coils will fit you just need the rear lca so that they will bolt up

95 EJ1 BG33P - RC
95 EJ2 BG33P - DRC

Coupe Crew #20

- Sun Apr 22, 2012 6:53 pm #302584 even if they did fit.. unless they have custom spring rates, the ride would be terrible. because the integra is heavier than a civic.

- Sun Apr 22, 2012 7:13 pm #302586

even if they did fit.. unless they have custom spring rates, the ride would be terrible. because the integra is heavier than a civic.

Oh yeah ..... I thought they might just be a bit stiffer but didnt cross my mind about rebound etc.

" If in doubt..... Flat Out " - Colin McRae (GRHS)

- Mon Apr 23, 2012 2:02 am #302615 it wouldnt be very bad just a little more stiff. but i think they are around the same spring rate.

your car is your story, dont let someone else write the book.

91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348