- Thu Mar 15, 2012 9:34 pm
#298390
almost every time when i make a right turn my car would honk. some honk are more noticable then other honk. idk what is wrong with it. im using the nrg quick release also. what do you guys think?
- Fri Mar 16, 2012 1:34 am
#298414
maybe the horn wire is grounding against the hub or other wire in the hub
- Fri Mar 16, 2012 3:04 am
#298427
that's what i was thinking too but today i unplug the fuse under the hood for the horn and replug back in, it didnt honk anymore -_- weird
92civic_vx wrote:maybe the horn wire is grounding against the hub or other wire in the hub :?
that's what i was thinking too but today i unplug the fuse under the hood for the horn and replug back in, it didnt honk anymore -_- weird
- Wed Mar 28, 2012 5:10 am
#300106
no i havent. i just unplug the horn under the dash until i find another solution.
- Wed Mar 28, 2012 5:26 am
#300109
I'm sure I have the solution. I'm guessing you weren't the one who installed the NRG quick release? The contact that is constantly touching the hub of the steering wheel seems to be loose. The contact is loose and touches the metal center of the steering wheel when you start to turn, which would make the horn go off. Take apart the steering wheel hub and locate the metal contact and secure it down. I used some rubber bands when I installed my NRG quick release. They seem to be holding up quite well, and I've never had any issues. Just be sure that the metal contact is well secure and is not loose.
- Wed Mar 28, 2012 3:46 pm
#300149
im going to try this, thank you
lolllllllll the reaction to some pple face is priceless
EG_Diaz wrote:I'm sure I have the solution. I'm guessing you weren't the one who installed the NRG quick release? The contact that is constantly touching the hub of the steering wheel seems to be loose. The contact is loose and touches the metal center of the steering wheel when you start to turn, which would make the horn go off. Take apart the steering wheel hub and locate the metal contact and secure it down. I used some rubber bands when I installed my NRG quick release. They seem to be holding up quite well, and I've never had any issues. Just be sure that the metal contact is well secure and is not loose.
im going to try this, thank you
andyc wrote:when I had that mine was honkin at people in bus stops haha...
lolllllllll the reaction to some pple face is priceless