Window won't roll up right?

Posted:
Thu Jan 26, 2012 12:49 am
by gijoe985
I bought my first civic, a 93 VX, and it didn't have a driver's window. I've replaced a few windows before on other cars, but I am having trouble with this one. I got some new glass from another EG hatch and I installed it, but it seems like the rear side of the glass is lifting higher than the front side and then it pops off the track. In order to get it closed, I have to be lifting the front and pressing down on the back, while I roll it up. I don't even have the door panel on yet because I couldn't close it without it.
Any ideas?
Re: Window won't roll up right?

Posted:
Thu Jan 26, 2012 1:03 am
by bartman201
gijoe985 wrote:I bought my first civic, a 93 VX, and it didn't have a driver's window. I've replaced a few windows before on other cars, but I am having trouble with this one. I got some new glass from another EG hatch and I installed it, but it seems like the rear side of the glass is lifting higher than the front side and then it pops off the track. In order to get it closed, I have to be lifting the front and pressing down on the back, while I roll it up. I don't even have the door panel on yet because I couldn't close it without it.
Any ideas?
this is what you need------------>>>>>>>
http://www.ebay.com/itm/DORMAN-740-763-Window-Regulator-/260760548817?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1995%7CModel%3ACivic&vxp=mtr&hash=item3cb68a35d1#ht_1605wt_1037<<<<<<<---------------

Posted:
Thu Jan 26, 2012 1:09 am
by bartman201
it can also be the little tabs that attach the window to the regulator. they are the ones right in front of #17


Posted:
Thu Jan 26, 2012 1:18 am
by Wicked
OR the regulator itself. Mine used to tilt and pop off the track until I took it out and hit it with a sludge hammer. Apparently they get bent over time and it causes this. There's a DIY for this somewhere on this site. Here it is good sir
http://civic-eg.com/viewtopic.php?t=147 ... ght=window

Posted:
Thu Jan 26, 2012 2:42 pm
by gijoe985
Wicked wrote:OR the regulator itself. Mine used to tilt and pop off the track until I took it out and hit it with a sludge hammer. Apparently they get bent over time and it causes this. There's a DIY for this somewhere on this site. Here it is good sir http://civic-eg.com/viewtopic.php?t=147 ... ght=window
This is kinda what I am thinking... I'll check it out. Thanks!
Re: Window won't roll up right?

Posted:
Wed Feb 08, 2012 3:43 pm
by gijoe985
I tried bending it back with no luck as of yet. I've considered just buying a new regulator, but mine is manual, not power. I'm having a hard time finding a driver, front, manual regulator. (And I can't search ebay from work, so other than there, no luck...)
bartman201 wrote:gijoe985 wrote:I bought my first civic, a 93 VX, and it didn't have a driver's window. I've replaced a few windows before on other cars, but I am having trouble with this one. I got some new glass from another EG hatch and I installed it, but it seems like the rear side of the glass is lifting higher than the front side and then it pops off the track. In order to get it closed, I have to be lifting the front and pressing down on the back, while I roll it up. I don't even have the door panel on yet because I couldn't close it without it.
Any ideas?
this is what you need------------>>>>>>>http://www.ebay.com/itm/DORMAN-740-763-Window-Regulator-/260760548817?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1995%7CModel%3ACivic&vxp=mtr&hash=item3cb68a35d1#ht_1605wt_1037<<<<<<<---------------

Posted:
Sun Feb 12, 2012 9:40 pm
by Jokerluv
ya my driver side reg is trashed, not sure if i can get in and fix it, hard get my hands in there
