Civic-EG.com Forum 3.3.1

- Sat Aug 06, 2011 9:04 pm #266519 does anyone know
wat swap did u use h or b
wat setup
mods,engine,suspension
tires
any input would be great

guy sayz
"wats going from a roll"
fred sayz
"wat this aint biscuits nigga"

[chrono404]

- Sun Aug 07, 2011 12:42 am #266560 For 4 or 5 grand already owning the car? or including the cost of the car?

Its possible depending on if you do the work your self and own the car.

Fastests setup would probally be a Turbo "G23 Vtec" (F22/f23 block, with forged rods, h22 water pump and timing belt, H22a/F20B DOHC VTEC head)

If you do this your biggest problem will be traction, Once you get slicks to fix it you will break axles, after getting stronger axles you will break your transmission. H/F Trannys are known to be weak, especially with higher power setups. To get around that people Run B Series trannys however they cost around a grand by themselfs.

This is just one possible setup, If I was going to build a dedicated drag car this is something I would highly consider. However there are many other ways of going fast.

Juice has done a 12.85 in a BONE STOCK b18 with LSD GSR Tranny and slicks.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Sun Aug 07, 2011 2:26 am #266569 12.85? How?

"If you want your car to be cheap and fast it wont be reliable... If you want your car to be reliable and cheap it wont be fast... If you want your car to be fast and reliable it wont be cheap"

- Sun Aug 07, 2011 2:28 am #266571

12.85? How?

12.85 in a BONE STOCK b18 with LSD GSR Tranny and slicks

he probably knows how to drive the thing.

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Sun Aug 07, 2011 3:54 am #266585 motor itself is completely bone stock... but it is boosted and on ET Streets.


and oh yea.. JUICE gots driving skills!! http://youtu.be/yxgXEOdj5mo

600whp Turbo 84mm LS/Vtec Drag Hatch

[chrono404]

- Sun Aug 07, 2011 4:38 am #266590

motor itself is completely bone stock... but it is boosted and on ET Streets.


and oh yea.. JUICE gots driving skills!! http://youtu.be/yxgXEOdj5mo

I forgot to mention its boosted. You left that Turbo 2.5liter WRX in the dust. I always enjoy watching your video's.

edit:
If you dont mind fabrication, AWD will help out greatly in the 1/4.
http://www.youtube.com/watch?v=G2hTUGnW-vk

or even better K Series AWD!
http://www.youtube.com/watch?v=JZMmUHCa ... re=related

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Sun Aug 07, 2011 5:32 am #266592

or even better K Series AWD!
http://www.youtube.com/watch?v=JZMmUHCa ... re=related

that is just sexy right there

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Sun Aug 07, 2011 9:19 am #266599

motor itself is completely bone stock... but it is boosted and on ET Streets.


and oh yea.. JUICE gots driving skills!! http://youtu.be/yxgXEOdj5mo

Good driving bro, quick and clean shifting. Smoked that Subi.

"If you want your car to be cheap and fast it wont be reliable... If you want your car to be reliable and cheap it wont be fast... If you want your car to be fast and reliable it wont be cheap"

- Mon Aug 08, 2011 12:14 am #266679 i already own the car
and i would be doing the swap dont know much about tunning
so that would be part of the over head cost
picked it up for the quick 5hundy
painted it red slapped some wheels on it
i live in wichita ks
as u would expect the honda secne is none existent here
i also only make 8 dollas an hour been that way for two years
the economy bro the economy
i wanna put honda back in the game something that really
compete's
and i aint got much money
im also scared to rip into the motor thier just aren't any trust worthy shops here execpt maybe fusion even then i dont trust it
not even a tune
what do u think about an h22 on spray chrono
or even a gsr
let me know

guy sayz
"wats going from a roll"
fred sayz
"wat this aint biscuits nigga"

- Mon Aug 08, 2011 12:56 am #266682 KC might be a bit of a jot for ya, but call Chuong at Revline 8162214411 he'll set you up. Just dont call, and waste his time. He's a busy dude, but he knows his shit.

What engine do you have currently? D?

I would say the cheapest route would be a piston/rod turbo B series.

- Mon Aug 08, 2011 1:43 pm #266735 well if you can get a GSR setup for a decent price that is def the way to go!!

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Mon Aug 08, 2011 2:30 pm #266747

Good driving bro, quick and clean shifting. Smoked that Subi.

thanks man. Subi had bolt-ons and a tune too

600whp Turbo 84mm LS/Vtec Drag Hatch

- Mon Aug 08, 2011 10:45 pm #266789

motor itself is completely bone stock... but it is boosted and on ET Streets.


and oh yea.. JUICE gots driving skills!! http://youtu.be/yxgXEOdj5mo

nice video dude
that camera angle was pretty sick perfect for pullin away

guy sayz
"wats going from a roll"
fred sayz
"wat this aint biscuits nigga"

- Tue Aug 09, 2011 3:15 am #266819 defintly go H22 i ran 13.6 in my eg on street tires. only thing i have is full megan exhaust systrem, intake, nd dss axles. everything tht u see including the car was only $2500, if u spend like $1000 more easy 12's

"Wining is wining don't matter if its by a mile or a inch"

- Tue Aug 09, 2011 11:46 pm #266900 that thing is tight bro
what a deal for a tight sleeper
like the header
all motor power
is gangsta
part of me wants to add to this thread by doing a recap of the motor install
set my budget at 4000
and see how fast i can
it would be in the wrong place on the forum though

guy sayz
"wats going from a roll"
fred sayz
"wat this aint biscuits nigga"