Civic EG

Posted: **Sun Jul 17, 2011 2:10 am**

I have a eg6 with b16 a I snatched second and it Brock chunk of trans left axle and motor mount bolts in block.what will be best way to get them out?

Posted: **Sun Jul 17, 2011 3:29 am**

use an easy out drill bit and some wd-40 to make it easier to turn.

Posted: **Sun Jul 17, 2011 4:42 am**

I'll try that thanks

Posted: **Sun Jul 17, 2011 5:14 am**

If u can still see the nub in thre and can access it with a cutting wheel try just cutting a slit on the nub and using a flathead screw driver to unscrew it out...

Posted: **Sun Jul 17, 2011 5:40 pm**

both suggestions will work but i would try ease out

Posted: **Wed Jul 20, 2011 5:39 am**

sometimes if it barely comes out of the hole you can use a chisel and a hammer and carfully work it out. depend on how tight its in there

Civic EG

Broke motor mount bolts in block how to get out

Broke motor mount bolts in block how to get out