Page 1 of 1

aftermarket steering wheel and cruise control ???

PostPosted: Sat Oct 09, 2010 5:12 am
by 93hatcheg
can i keep my cruise control with a aftermarket steering on my 93 hatch si?? i ask because the resume and accel buttons are on the steering wheel i would be replacing. are they able to be relocated?

PostPosted: Wed Oct 13, 2010 1:42 pm
by Cynical 1
yes, it can be done.

i've seen people relocate the steering wheel buttons to the blank spot next to the dimmer control on the left of the steering column. also seen it moved to the top of the column cover.

either way, you are extending wires and reusing the factory buttons... just have to get creative...

PostPosted: Sat Oct 16, 2010 4:25 pm
by suspendedHatch
The cleanest way to do it is to use aftermarket switches. There was a write-up here or on club Integra, maybe Honda-Tech I don't remember. But it's very simple if you understand basic wiring.

http://causeforalarm.thecarthing.com/cr ... _sd_switch scroll down to "aftermarket switch".

PostPosted: Sun Oct 17, 2010 1:03 am
by 93hatcheg
cool thanks guys i am planning on getting a nice wheel with a nrg slim quick release but definatly want my horn and cruise control.

the idea about using aftermarket switched is really good cause honestly i dont see the oem switching blenidng well :P

PostPosted: Thu Jun 09, 2011 7:49 pm
by ejc
I just did mine and took detailed pictures because there is no definitive source that shows the process. Going to write a "how-to" this weekend

PostPosted: Thu Jun 16, 2011 6:47 pm
by ejc
Juat did a write-up (though not a very good one) on how to retain cruise control and your horn in the interior section. Good luck