Civic EG

i have a set of disc brake from a 94+ GSR

i was wondering if i need a acura brake cable or i can just use my civic one?

bolt on?

let me know thank you very much! =)

im pretty sure you need the integra e brake cable.
and unless your civic is an ex or si youll need the proportioning valve from the integra too

You need the Integra ebrake cable. You only need a prop valve if you're doing the front and rear. It will have to be from a non ABS Civic, Del Sol, or Integra that is rear disc brakes. A 15/16 master cylinder from a 91 Civic EX is recommended but not necessary. Upgrading the brake booster is never necessary and there is no actual benefit from doing so.

That about covers it.

u do need the integra e-brake cables and u can use a proportioning valve from a da integra thats what i use one from when i did my conversion if u need any help bro hit me up 405-429-9669 my name is jason

No the DA prop valve bracket doesn't bolt up to the Civic. Like I said, get a 94+ Integra RS, 92-95 Civic EX or Del Sol (w/rear disc) prop valve.

suspendedHatch wrote:No the DA prop valve bracket doesn't bolt up to the Civic.

You can swap on the civic bracket.