Civic EG

Newbie just wondering i seen many times you can put da seats into a eg hatch. I was at the junkyard did some test fitting and they won't fit is there something i'm missing? sorry to bother!!! What seats will directly bolt in?

You can fit the da seats in the hatch but you have to switch the rails from the 92-95 civic seats onto the da seats. Ones that will directly bolt in would be dc2 integra seats ls and gsr. Btw integra seats are comfy as hell

so the side that unbolts right? cause i dont have a welder lol stupid question? Thanx for the quick reply!!

ok, you got me confused..you are talking about the front seats right? cause I don't see you having to do any welding. You just swap the rails from the eg seats to the da ones. Or just find a newer integra and take the seats from that and you won't have to worry about swapping rails.

no welding just bolts

its true, just un bolt all the parts from old seat and put on new seat.

K well i must have grabbed some different seats or have some different seats. Because theres no way these brackets are fitting. I had to drill out a couple of rivets and spot welds. To put half the bracket onto the seat for the drivers inside track does that sound right? It sorta fits now the other side won't just bolt on either. I would have to drill some new wholes also.

your waisting your time. 94 up integra seats. i have 95 gsr seats in mine and bolt up perfect. if your going to the point of welding in some seats they better be some sparco or bride seats.

how about you take some pictures of what you are working with?

wtf

matt is (eg6) wrote:wtf

Thanx i got it !!

good.