Ride of the month nominations & voting.
User avatar
By teal_dx
#348468 How it works:
- This is a submission/nomination thread where members' vehicles should be posted.

- Members can post their own vehicles, or other members' vehicles.

- The owner of any car nominated must have at least 50+ posts and have been a Civic-EG.com member for at least 3 months.

- Post 4-5 pictures as well as modifications list.

- After 5 or so cars are submitted, the submission thread will then be locked and a new voting thread will be created with all the vehicles. Then you all get to choose the Ride of the Month!

- The winner will have their car featured on the main forum page for the month. Also they will have their car added to the Civic-EG.com Hall of Fame.

- You can win multiple times as you continue to modify your car, but not more than one time in the last 12 months. See the Hall of Fame for past winners.

Let's see some submissions for October Ride of the Month! :woot:
User avatar
By JUICE
#348490 I'm ready for another go. All sorts of new stuff since last year.





Exterior/Interior

-All new steel full quarters/rockers, RUST FREE!!!
-13" Exospeed VPD w/ Mickey Thompson 24.5x9x13
-LS Meshies rear
-CCC Racing Street drag wing
-Custom Welded in 6 point cage
-TPR rear diffuser
-rear interior gutted
-LS seats w/ 5 point RCI cam lock
-ARP extended wheel studs
-VX pass mirror delete
-Taylor Battery box relocation kit
-Moroso Kill switch thru tailgate keyhole

Suspension

-Omni Drag coilovers
-Skunk2 12k front 18k rear springs
-Full-Race Pro Am Traction bar
-Skunk2 front camber kit
-Skunk2 LCA's
-Energy Suspension bushings
-99 integra rear disc swap
-Corner Balanced 65/35 by Turn-in Concepts



Engine / Drivetrain

-ERL Darton Sleeved 84mm B18b1 block
-ERL 5-point main girdle
-ARP main studs
-CP Turbo Pistons w/ coated skirts
-CP Piston rings
-Manley Turbo Tuff Rods
-ACL Race/Calico Coated Bearings
-polished LS crank
-ATI Race Damper crank pulley
-Moroso Oil pan

-BES ported B16 head
-Supertech Ti dual springs
-Supertech valves
-Bronze valve guides
-Crower retainers
-Skunk2 Pro 1 Cams
-Golden Eagle Cam Gears
-Gates Racing Timing Belt
-JG Edelbrock Intake mani
-Port matched 3" TB
-TPR fuel rail/lines

-GSR transmission
-Quaife LSD
-Speedfactory SCHA
-Synchrotech carbon synchros


-Competition Clutch Twin Disk
-DriveShaftShop 2.9 axles


Turbo Components

-Precision SC6162 re-housed by PureTurbo's
-Precision 46mm Wastegate
-MAC Electronic Boost Solenoid
-RC 1000cc Injectors
-Walbro 255 pump
-SLS T3 Top Mount manifold
-SLS 3" Downpipe
-Tial Q 50mm BOV
-Custom 2.5" / 3" Intercooler piping
-GodSpeed 31"x12"x3" FMIC
-BlueRidge Motorsports battery tray Catch Can




Made 547whp @ 22 psi on 112 octane race gas. Tuned by Dave Blundell (Blundar) on NeptuneRTP.

dyno vid- http://www.youtube.com/watch?v=LOu-HUJNl6Y&feature=share&list=UUV8RIduW1yw6n0WesXbZ72w


Image

Image

Image

Image

Image
User avatar
By jred
#348495 I feel bad...i didn't even know i was submitted for September ROM :oops:
Thanks to all that voted for me :thumb:

Allot is being done to the car right now.....It sure is a work in progress :D
User avatar
By teal_dx
#348727 I'll go :D
Teal_dx 1992 Civic Dx

Body/Exterior:
JSP CF Hood
VIS CF Tail Gate (sold, back to stock)
DIY Army Green/Black roof paint job
Shaved & tucked engine bay
DIY Amber corners
VX rear diffuser (not yet installed)

Engine:
D16z6
SRP 75.5mm forged pistons
Eagle Rods
ARP Head studs
1999 D16y8 intake manifold
knockoff AEM fuel rail
AEM fpr
DSM 450cc Blue top injectors + resistor box
Motorola 2.5 bar MAP
Walbro 255 LPH
stainless fuel line, -AN fittings, inline fuel filter
Custom K&N for clearance
Auto to Manual conversion mount
OEM mounts urethane filled

Turbo:
Garrett T3 .60/.48 60 trim internal WG
Cast manifold
2.5" Spoolin DP
3" Thermal cat back
2.5" piping & FMIC
Hallman manual boost control
knockoff HKS BOV
Function 7 -AN downpipe flange & fittings
Oil Sandwich Plate Adapter
Custom K&N Air Filter

Si transmission:
OBX LSD
XTD stage 3 6-puck clutch
8 lb flywheel
braided stainless clutch line

Interior & Electronics:
EX Gauge cluster w/ Tach
Autometer Oil pressure, Boost, EGT gauges
Odyssey PC680 battery
slim push fan
4ga and 8ga custom wiring for electrical system
P28 chipped with Hondata S300

Suspension:
Tokico HP struts/CR coil overs
Energy Suspension Master Bushing Kit
Energy Suspension Trailing Arm Bushings
Suspension Techniques 22mm front & 19mm rear sway bars
ASR A-Spec subframe brace

Wheels/tires:
polished 14" HX wheels
195/60R14 Falken Azenis RT615

2-piece 15x7" +18 r, 15x6.5" +23 f Work Euroline S2H Wide on 195/50R15 Falken 912's - SOLD

Forged 15x7 +32 OZ Racing Starlights on 205/50R15 Nittos

Brakes:
EBC Greenstuff pads (not yet installed)
EBC slotted/drilled rotors (not yet installed)
SS brake lines


Image

Image

Image

Image

Image
By Axix23
#348730 you can't win. You own the website. hahaha :thumb:
User avatar
By rtegra92
#348751 I guess i will stay with the OHIO theme right now and try again

up is the J SWAP

J35 bottom end
TL Type s heads, intake and throttle body
TL type s Trans.

Godspeed t67
big doushin intercooler
greddy BOV
godspeed wastegate

ALL piping and stainless work done by yours truly.

Innovate lc2
innovate Ot2

extra fuel provided by two 1600cc bosch injectors
controlled by an additional injector controller

rota attack 15'
eibach springs

shift plate also made from stainless by yours truly.


Image
Image
Image
ImageImage