Civic-EG.com Forum 3.3.1

- Thu Mar 19, 2015 12:18 am #352681 So I replaced my hood latch today, and when I took off my bumper I found this beautiful damage


Could this make my car lopsided?


First I thought it was the spring set up, then I realized that the driver side tire is a meaty 14. So that's what I figured to make the wheel gap off.

What do you guys think?

[teal_dx]

- Thu Mar 19, 2015 2:10 pm #352689 I'd start by getting the same sized wheels/tires on the left & right side.
It's going to be hard to compare, even with a tape measure, if they are different sizes. Plus that's probably going to cause the car to want to pull if they're different sizes.

The bent bumper support probably has nothing to do with it. I'd look at the underside of the car for any suspension or subframe damage up front though.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Mar 19, 2015 3:07 pm #352693 Sounds good! Thanks! I have some 15in Heliums on the way! So I'll throw me one get an alignment and go from there!