Appearance, Paint & Body Work
User avatar
By FG2_Andrew
#334650 you have a couple options:

1. keep checking ebay (i've seen them there before)
2. get a CF sticker
3. make a mold using fiberglass and a roll of CF


if you do option 3, consider keeping your mold or making more if it turns out well and selling them on the side. if you youtube "making a CF mold", it doesn't have to be a 92-95 fuel door, the steps will be the same.
User avatar
By ohDirka
#334662
FG2_Andrew wrote:you have a couple options:

1. keep checking ebay (i've seen them there before)
2. get a CF sticker
3. make a mold using fiberglass and a roll of CF


if you do option 3, consider keeping your mold or making more if it turns out well and selling them on the side. if you youtube "making a CF mold", it doesn't have to be a 92-95 fuel door, the steps will be the same.


I like the 3rd option :thumb:
User avatar
By jadeydrag0117
#334668
FG2_Andrew wrote:http://www.youtube.com/watch?v=Ybyh6Q9MBgE


one of the better tutorials i have found. BECAUSE he shows his mistakes!


DAMN would have been down to do this, but i ended up just buying a CF fuel door cover... lol


this prob wud be super expensive anyways
User avatar
By FG2_Andrew
#334670 cost probably depends on if you have the stuff laying around vs. endeavor


OP, post where you bought your fuel door for future reference! :thumb: Congrats on finding one, btw.
User avatar
By jadeydrag0117
#334695
FG2_Andrew wrote:cost probably depends on if you have the stuff laying around vs. endeavor


OP, post where you bought your fuel door for future reference! :thumb: Congrats on finding one, btw.


NOOO lol it was a CF COVER/LID fuel door, its like a little lid that covers attaches onto the fuel door whateves :? lol

and i bought it on amazon , they sell it for cheaper from the same person who makes it, special-carbonfiber.com

but heres a pic

http://special-carbonfiber.com/image/ca ... 00x700.JPG