Civic-EG.com Forum 3.3.1

- Wed Dec 07, 2011 7:35 am #284502 Does any one know how. Remove bondo from the side moldings?

When I bought the car they shaved the side molds and put a 96 front end on my Hatchback b4 i got it. I was really despreat to have a Hatchback so i jumped at the opertunity and took it. Il be puting the stock front end tomorrow. [/list]

my thread

http://civic-eg.com/viewtopic.php?t=23289

[teal_dx]

- Wed Dec 07, 2011 3:13 pm #284530 get a stiff wire wheel, high speed drill and a dust mask

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Dec 08, 2011 10:16 pm #284694 somtimes u gotta think outside the box thnx should go down to bare metal?

my thread

http://civic-eg.com/viewtopic.php?t=23289

[teal_dx]

- Fri Dec 09, 2011 2:50 am #284739 yeah you might as well if you're going to repaint the car. if they filled the gap with bondo, you never know what kind of lazy prep work they did.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Sun Dec 11, 2011 6:22 pm #285044 I got the new front end on aready but headlights sit a bit low. Any1 have a problem after replacing there radiator support?

my thread

http://civic-eg.com/viewtopic.php?t=23289

- Mon Jul 09, 2012 9:15 am #310393 Did u bolt up or weld the radiator support up

- Mon Jul 09, 2012 9:45 am #310395

yeah you might as well if you're going to repaint the car. if they filled the gap with bondo, you never know what kind of lazy prep work they did.