Civic EG

Posted: **Tue Jan 18, 2011 6:06 pm**

does anyone know how i can take out some deep scratches out of a front bumper.
my plan is to clean up the scratches and fill them with some epoxy then sand it down and paint. i also have a couple of screw holes i have to fill as well.
any other advice would be help full. thank you in advance

Posted: **Thu Jan 27, 2011 1:30 am**

bump

Posted: **Thu Jan 27, 2011 3:10 am**

how deep are they? You Can use Plastic weld. anybody shop that is good can clean it up.

Posted: **Thu Jan 27, 2011 3:55 am**

ive used bondo for a decent scratch
ya people say it will crack or it doesnt stick

well its been almost a year and nothing wrong on my bumper
where its been bondo'd

Posted: **Thu Jan 27, 2011 7:42 am**

Try Light wet sanding it and use a cutting compound an rub very hard n then polish n wax, should make it look alot nicer. Removed a deep scratch on my car :thumb:

Posted: **Sun Feb 06, 2011 2:50 am**

how deep are they?

there about a penny think deep.

Posted: **Sun Feb 06, 2011 4:07 am**

blk92hb wrote:
how deep are they?

there about a penny think deep.

yea that shouldnt be a problem. any body shop that can do plastic weld can easily fix that.

Posted: **Sun Feb 06, 2011 7:56 pm**

ok thanks.

Posted: **Thu Feb 10, 2011 8:11 am**

Hi,
Why don't you use QUIXX Car Scratch Remover for the scratches at the bumper.
Quixx is a famous product for scratch removing.
Thanks

Posted: **Thu Feb 10, 2011 4:27 pm**

Albern wrote:Hi,
Why don't you use QUIXX Car Scratch Remover for the scratches at the bumper.
Quixx is a famous product for scratch removing.
Thanks

i dont think he is talking about scratches in the paint. i think he is talking about the bumper it self having scratches in it and deep marks.

Posted: **Thu Feb 10, 2011 8:26 pm**