Civic EG

So my rear left window seal isint actually sealing anything and all the water is just going into my door and draining out the bottom.

I need to go to the junkyard and get another, but i can't figure out how to get the thing off so i know how to when i'm at the junkyard

It seems to be glued at one end? But the glue has come off so it aint doing much.

Another thing, how do i remove the door card of the door im talking about?

It has a power window connection next to the handle and it doesn't wanna come free.

you mean the rubber strip?

#7 in the link?
http://www.hondaautomotiveparts.com/aut ... DOOR+GLASS

Nah that aint it ...





That seal that isin't sealing, all the water just goes into the door and out the bottom, no harm done but i still dont want it like that.

on the 2 door civics you had to take the inside door panel off. Then you could see the clips on the inside that held that piece on.

While you have it off is a good time to re-paint it: http://civic-eg.com/viewtopic.php?t=1161
looks like your finish is starting to wear off.