Civic EG

Posted: **Thu Jul 05, 2007 11:13 pm**

thats tape style door molding too there craig. i got it from passwordjdm.com. cost me 200US to get it here. lol. i have another set of clip style door molding if you want it craig. if you want to try another method of painting.

Posted: **Thu Jul 05, 2007 11:19 pm**

defentaly...what you want for it

Posted: **Fri Jul 06, 2007 12:35 am**

looks a bit squint y0 And do you know the seatbelts are made from takata ?!

Never knew we had the "JDM" side strips

less shit to pay out for :thumb:

Posted: **Fri Jul 06, 2007 2:01 am**

what about my seat belts?

Posted: **Sat Jul 07, 2007 10:44 pm**

Eg seatbelts are made by Takata :lol:

And yeah i thought that these JDM strips were narrower than ours... was looking at buying a set!! Lucky i found out before wasting money buying something i already had :lol:

Posted: **Sun Jul 08, 2007 4:03 am**

haha i didn't know that about the seatbelt...thats cool, if only i could pronounce it.

Posted: **Sun Jul 08, 2007 10:24 pm**

Graham sent me it

Posted: **Sun Jul 08, 2007 10:41 pm**

Was looking for that picture but couldnt find it

Posted: **Mon Jul 09, 2007 1:54 am**

well that kinda cool to know

Posted: **Fri Oct 26, 2007 3:20 pm**

lets see the beast try them on..

Posted: **Fri Oct 26, 2007 3:25 pm**

another great write up :thumb:

Posted: **Sat Oct 27, 2007 3:08 pm**

vtec_gloucester wrote:another great write up

thanks man!

B16nintyfiveCoupe wrote::thumb: lets see the beast try them on..

are you talking about the moldings on my eg, haha my car is in a million pieces!

Posted: **Wed Feb 13, 2008 6:16 pm**

Posted: **Mon Feb 25, 2008 4:01 am**

Alternative Side Molding Paint Option
Not try to Jack this thread or anything, However after talking with York62 Via PM, I decided I would post what I did.

After Reading the DIY on Page 1 I wanted to do the same, Only with Black. I tried taking off the Side Molding at my local junkyard and couldn't do so with out Destroying it. I Pmed York62 and asked him how he did his. After hearing his Response I decided Painting it on the Car would be a Much better option.

Materials :

Duplicolor "Truck, Van and SUV Trim Paint" - Black
Duplicolor Clear Coat (Not Used, Already Bought for a Previous Project)
Newspaper (x Alot)
Masking Tape

I first Washed the Side Molding to get all the dirt and muk off of it. I Then used Masking tape all around the Trim Paint, then Followed by Taping Newspaper on to be a Mask.

Following This I did Multiple Light Coats to get it all Black. I was planning on putting a Layer or 2 of Clear Coat, However I decided Against it when I saw the Final Product.

Before :

After :

Pictures are on Different Sides, however you can see the Change that happened.

Difficulty :
1 out of 10.

It was Super Easy to do, Hardest part was taking off all the Masking tape.

Posted: **Mon Feb 25, 2008 4:50 am**

looks good man, a nice addition to this post!

Civic EG

DIY painted side moldings.(56k friendly...NOT)