Page 1 of 1
front lip types and sizes
Posted:
Mon Jul 13, 2009 12:02 amby slowj1
I really want to put a lip on my ej but i don't want a one that is going to scrape every time on a drive way since the car is already doing that in some drive ways. What lip can i get that will not make me cringe every time i pull into my drive way? Thanks for the advice guys!
Posted:
Mon Jul 13, 2009 2:02 amby Ajax1989
get what ever lip you like and that would look good on your car
but GET a polyurthane<- bad speller
it wont brake, crack, but it will bend
but goin over speed bumps, goin up hills and driveways, try goin at an angle
Posted:
Mon Jul 13, 2009 3:37 amby asianrob
get a stock front lip. can never go wrong with that.
a lip to stay away from is a spoon/spoon style lip.. those fuckers hang so low.
Posted:
Mon Jul 13, 2009 5:08 amby jdmtuned231
I agree with rob... stock lips look very clean/simple... also, if you do decide to go aftermarket, then get polyurethane like 94_jdm_ferio said... no matter what you do (unless you literally cut it) its impossible to break a poly lip
Posted:
Mon Jul 13, 2009 5:36 pmby slowj1
Ok cool thnaks guys for the help now the quest for one is on. thanks again