- Mon Jun 22, 2009 12:30 am
#124830
Teal Posted up what Paint to get paint your stock usdm corners into Amber. I Didn't get the same paint but this is how I Painted my Corner lights, Figured I would post up a DIY.
List of Parts:
>- Tamiya ps-43 translucent orange Paint
>- Steel Wool
>- Corner Lights
1) Take off your Corner Lights
2) Clean off the Corner Lights Thoroughly, I only needed to Rub them off with a Rag.
3) Scrub with Steel Wool, This gives the paint area to stick to.
4) Paint, Use light Coats.
5) Install Lights after Dry
After:
Installed:
2017 Chevy BoltEV DD |2001 Honda CRV SE
List of Parts:
>- Tamiya ps-43 translucent orange Paint
>- Steel Wool
>- Corner Lights
1) Take off your Corner Lights
2) Clean off the Corner Lights Thoroughly, I only needed to Rub them off with a Rag.
3) Scrub with Steel Wool, This gives the paint area to stick to.
4) Paint, Use light Coats.
5) Install Lights after Dry
After:
Installed:
Last edited by chrono404 on Sat Jul 24, 2010 4:47 am, edited 3 times in total.
2017 Chevy BoltEV DD |2001 Honda CRV SE