Civic-EG.com Forum 3.3.1

- Sat Sep 15, 2012 12:10 pm #315718 So the time has come to get some new rubber on my pride n joy, was considering going with some low profiles to suit my 15inch ANKA wheels. Need suggestions on how to go about this, if it's advised to go "low pro", tyre sizes eg: 225/45r15, and any pros and cons with going low pro. Open to suggestions and love to hear anybodies views on the subject.

Cheers!

sKizO

95' EG D16 Vtech.
Tuckin 15' s
Aftermarket Computer
Extractors, 2 2.5' Cat back

Live Fast,Die Young.

_Picture.Me.Slidin'_

- Sat Sep 15, 2012 12:34 pm #315719 how wide are your wheels?

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Sat Sep 15, 2012 7:35 pm #315732 195/50R15

95' EG D16 Vtech.
Tuckin 15' s
Aftermarket Computer
Extractors, 2 2.5' Cat back

Live Fast,Die Young.

_Picture.Me.Slidin'_

- Sat Sep 15, 2012 9:15 pm #315742 wheels lol not tires

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Sun Sep 16, 2012 12:28 am #315757 Anything smaller than a 50 sidewall looks goofy IMO.

1993 Honda Civic VX - Street/Strip Project
1994 Honda Civic EX - Daily Driver

HYBRID Fabrication!

- Mon Sep 17, 2012 12:16 pm #315861

Anything smaller than a 50 sidewall looks goofy IMO.

and rides rough.

[teal_dx]

- Mon Sep 17, 2012 3:33 pm #315872 I would go 195/50R15 or 205/50R15, depending on wheel width.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Sep 17, 2012 5:39 pm #315879 I'm running 195/55/15 on the front and 205/50/r15 on the rear of my hatch mounted to 6.5 wide konig heliums