Civic EG

I know that the HX alloy (14 inch) rims fit Integra hubs if you use 5mm spacers. I was wondering if there's any chance that the 13 inch VX alloy rims might also fit?

I have a VX and I'm trying to keep it sleeper. I want to swap Integra hubs on w/out having to get aftermarket rims.

what brakes would you be using? teg brakes or the factory vx brakes?

If you use the teg brakes, which you will kinda have to with the bigger hubs. they will not fit. wont clear the caliper.

with 15 inch LS mesh



With 14 inch audi rims.



Both with GSR front brakes.

Neither will the HX rims, w/out spacers. Anyone know if the VX rims will clear w/spacers.

Wouldn't make any sense to try to fit VX brakes on Integra hubs.

NM, I'll try it and let you guys know.

vx wheels are 13's they wont fit even with spacers

Thats kinda what i was trying to show him. the 14s i had on my barely cleared the caliper. A stickie weights thickness is all the clearance I had. no way a 13 will fit over them.

suspendedHatch wrote:Neither will the HX rims, w/out spacers. Anyone know if the VX rims will clear w/spacers.

Wouldn't make any sense to try to fit VX brakes on Integra hubs.

NM, I'll try it and let you guys know.

HX will fit if you shave a little off the caliper or if you use spacers VX wont fit teg front brakes at all even with spacers but it will fit rear discs i think

Yeah that's what I was afraid of. I guess I'll put them on the Civic I'm selling and keep the 15's that are on there.

It's going to look pretty silly... bronze Rota Slipstreams on a teal hatch!! Looked good on the gunmetal hatch though.





Forgot to mention that the whole reason for this is because I want to swap the Integra suspension off the gunmetal hatch over to the teal hatch.