16x8 plus 10 offset question...

What fits best, Weights & Sizes
 Reply

16x8 plus 10 offset question...

By EJ1STYLEN
- Thu Sep 22, 2011 4:27 am #273616 hey guys im wondering on what size tire should i run with a 16x8 plus 10offset rota grid offroad, i want the flush look. and do you guys think i will poke out alot and im dummped on function coilover. and do guys think i should run a 10mm spacer? i want the hellaflush look so any advice be nice...thanks
User avatar

By teal_dx
- Thu Sep 22, 2011 1:20 pm #273667 Here's some links on H-T from people who have tried these wheels.
You'll need lots of low, camber, rolling & a little pulling to make it work.

http://honda-tech.com/showthread.php?t=2762757

http://honda-tech.com/showthread.php?t=2480464

http://htarchive.org/showthread.php?t=2933882

http://honda-tech.com/showthread.php?t=2009900&page=116

By EJ1STYLEN
- Fri Sep 23, 2011 2:55 am #273863
teal_dx wrote:Here's some links on H-T from people who have tried these wheels.
You'll need lots of low, camber, rolling & a little pulling to make it work.

http://honda-tech.com/showthread.php?t=2762757

http://honda-tech.com/showthread.php?t=2480464

http://htarchive.org/showthread.php?t=2933882

http://honda-tech.com/showthread.php?t=2009900&page=116


ok i guess ill have to use 10mm spacer all around to clear the brake bracket...and as far as pulling my fender its already flared hella and and my camber up front right now sit's -4* on both side....so yeah i guess 195 will do
User avatar

By Greasedmonkey
- Fri Sep 23, 2011 4:09 am #273892 Judging by those threads, the 15x8 +10s I wanted wont work the way I wanted them to. LAME.

By EJ1STYLEN
- Fri Sep 23, 2011 4:54 am #273905
Greasedmonkey wrote:Judging by those threads, the 15x8 +10s I wanted wont work the way I wanted them to. LAME.


just run a 5mm spacer grease so ur offset will be +15...to my problem if i run a 5mm spacer would i have to extend my wheel stud? or will i be fine?...and if i run 5mm spacer all around my offset will change to +15 therefore i think ill be fine with a fender pull and roll of course hella camber...hehe

By EJ1STYLEN
- Sat Sep 24, 2011 4:04 am #274152
teal_dx wrote:if you run a spacer, you are decreasing the offset.
So 5mm spacer on a +10mm wheel = +5mm offset.
.

Oh...I thought I would be increasing the offset, I was on stance nation and they were all telling me to just add a 5pm spacer so that offset will be +15 with the added 5mm spacer...idk right now kinda confuse bout the mix opinion...
User avatar

By Greasedmonkey
- Wed Sep 28, 2011 4:23 am #275023 He is correct...adding the spacer lowers the offset. If a +10 wont work, then a +5 will work even less.
User avatar

By kingjmack
- Thu Sep 29, 2011 4:04 am #275201 I need to look into this wheel size because its what I want to run in order to fit a larger brake rotor.
 Reply
Return to Wheels & Tires