Page 1 of 1
would this fit
Posted:
Mon Jan 31, 2011 2:46 pmby beerys95lx
Rota Slipstream Wheels (15 x 6.5 / 4 x 100 / +28 )
Options:
Black
Nitto NeoGen 205-50-15
ok i found this on passwordjdm.com what they fit on a 95 lx civic
Posted:
Mon Jan 31, 2011 5:03 pmby teal_dx
Yes they will fit but depending on your height you may need to do some fender rolling.
Posted:
Tue Feb 01, 2011 3:28 amby beerys95lx
it stock for now thinking about maybe 1 or 2 inch.
Posted:
Tue Feb 01, 2011 4:36 amby teal_dx
this will give you an idea...
the wheels on the front of my car are 15x6.5 +23mm offset
So yours will sit in +5mm further than mine. I only have 195/50R15 tires though so you should be alright with the 205's.
I did do some fender rolling and still rub sometimes but I'm kind of low too. You should be ok on a 2" drop
Posted:
Tue Feb 01, 2011 6:29 amby Butterzz
Oh Teal, you sexy son of a bitch.
Posted:
Tue Feb 01, 2011 7:32 pmby beerys95lx
i second that
Posted:
Tue Feb 01, 2011 7:39 pmby beerys95lx
do you think +10 would look better
Posted:
Tue Feb 01, 2011 8:47 pmby teal_dx
I personally wouldn't do +10 unless you were trying to go for the hellaflush look.
To me slipstreams say "performance" more than they say "hellaflush" since they don't have a deep lip.
Plus you'll have more body work to do (rolling/pulling fenders) depending on your drop, in addition to a 205/50 tire being a good meaty tire and not a stretched tire on a 6.5" rim width.
Posted:
Tue Feb 01, 2011 9:00 pmby beerys95lx
ok but how do the +10 and +28 rims look depth wise
Posted:
Tue Feb 01, 2011 9:03 pmby Eg6H2D
What about these..
http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT
they have a 40mm offset? ..
So how does it go the higher the offsetmm # the more the wheel sticks out of it's home??
Posted:
Tue Feb 01, 2011 9:09 pmby beerys95lx
ya but i can get them for about the same price on passwordjdm