What fits best, Weights & Sizes
User avatar
By Datsmart
#217725 1986 - 1990 MR2 is 4X100mm.
1991 and up MR2 is 5x114.3mm.
By EJ1STYLEN
#217726 damn, i might have to buy adapter hub...that just put me down..lol
By MG6
#217786 are you looking at the 85-89 rims? or the 88-89 SC tear drop rims?
By EJ1STYLEN
#217804 I have a eg8...I guess ill just buy a 4x100 to 4x114 adapter kit, I tried it today at work and it was 4x114..lol u guys know if running a 25mm adapter kit would make it stick out hella? The rims are 16x7 w/ a +20 offset?
By EJ1STYLEN
#217823 It would look like a lowrider huh? I guess Ill call some wheel places and see how much to re-drill a 4x100 hole so it can be a universal rims at the same time...hehe
User avatar
By Greasedmonkey
#217831 or you could sell the wheels you have and get ones that fit?
User avatar
By teal_dx
#217861 look at the back of the wheel, the mounting surface needs to be completely flat to be re-drilled. many wheels are not this way.
Sounds like a lot of work for some oem MR2 rims...
By EJ1STYLEN
#217958 Ill look at the rims, no i dont have a oem mr2 rims i have some enkie rims that 4x114 w/ +20 offset and i want to know if i can get them redrill to 4x100...
User avatar
By asianrob
#217986
EJ1STYLEN wrote:Ill look at the rims, no i dont have a oem mr2 rims i have some enkie rims that 4x114 w/ +20 offset and i want to know if i can get them redrill to 4x100...


i believe Memoryfab can do it.
By EJ1STYLEN
#218024 ill try to take a picture of it tomorrow with a better camera plus im hella lazy right now to take a picture of it...idk know can you guys post a pic of how it would look if put a 25mm=(1inch thick) 4x100 to 4x114 hub adapter on a 16x7 w/ +20 offset on a slammed 4 door eg8...idk i was thinking if i cant redrill a new hole, might just buy the hib adapter and see how it would look. cause right now im kinda slammed on 17inch rims w/ rear camber kit. so if i put the hub adapter and the 16x7 w/ +20 offset, ill hella camber the rear but i was thinking the front though...hehe, can you guys please post a pic and see how it would look...
User avatar
By Greasedmonkey
#218084 the wheels with the 25mm adapter with have an effective offset of -5.4mm. Which means your 16x7s will be poking out of the wheel well. No slamming allowed there.