Page 1 of 1

wheels not straight ?? pls help

PostPosted: Fri Jan 29, 2010 5:36 am
by vtecyo
i just change my wheels from 17 inch rims to stockys and my wheels looks like its bent in and i wanted to know if i should worry about this ?? please help =]

PostPosted: Fri Jan 29, 2010 6:14 am
by Dippin_EG
did you get an alignment after you switched back? if not, thats most likely your problem.

PostPosted: Fri Jan 29, 2010 7:08 am
by vtecyo
Dippin_EG wrote:did you get an alignment after you switched back? if not, thats most likely your problem.





naah i havnt but my mates says it could be camberd or seomthing like that ?

PostPosted: Fri Jan 29, 2010 7:46 am
by ikon
does the top tilt in towards the engine. if so thats camber........ ROCK IT :lol:

PostPosted: Fri Jan 29, 2010 7:53 am
by vtecyo
ikon wrote:does the top tilt in towards the engine. if so thats camber........ ROCK IT :lol:

LOl yeh it is. should i fix it if so how ?? would it break my axle or anything ??

PostPosted: Fri Jan 29, 2010 2:07 pm
by teal_dx
Can you post some pics?

Some negative camber is acceptable. It is toe out that chews up the inside of your tires.
Best bet is to get to an alinement shop :thumb:

PostPosted: Fri Jan 29, 2010 5:09 pm
by vtecyo
teal_dx wrote:Can you post some pics?

Some negative camber is acceptable. It is toe out that chews up the inside of your tires.
Best bet is to get to an alinement shop :thumb:

haha oh okas thanks heaps =]