Civic-EG.com Forum 3.3.1

[Apexracing]

- Sun Oct 25, 2009 4:03 pm #152686 my buddy and i picked up a beautiful set of ls meshes for his 94 integra, another friend of ours bought them on his cx hatch(should be joining the site) any ways, there is a light coat of bronze paint on the out side of the wheel. what would be the best way to remove the paint so we can return them to the aluminum finish.

- Sun Oct 25, 2009 5:24 pm #152696 try clay baring it off. that should take it off. if not mabey try a light solvent ( paint thinner ect) or if all else fails. wet sand it with some higher grit sandpaper

- Sun Oct 25, 2009 5:37 pm #152698 lacquer should do it

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe