What fits best, Weights & Sizes
User avatar
By jaysuper
#147743 Have you guys read that issue of project car with the hatch vs nissan g20? well I want to know the name of that tool that they use to roll the fenders. :? You should see that hatch it looks great.
User avatar
By Mr. Pink
#147744 its an Eastwood fender roller, and they are $400-500
User avatar
By chrono404
#147745 You can also do it the ol skool ghetto way. l

You will need a jack, preferbally a floor jack, and a baseball bat, preferbally metal.

Use the floor jack to lift the car up enough so you can fit the bat inbewteen your tire and the bat. have the at a steep angle like 60-70 degrees, Then either work your way around with the bat around the tire or lower the car slightly and lift it back up and move over slightly.

This is what me and my friends have done to get rolled fenders. Works, and costs no money, Plus gives you something to do when hanging out.

Good luck
User avatar
By biggnutz123
#147754 x2 on the bat method it works great once you get the agle down take your time and do it slowly and itll look just like the pros :hehe:
User avatar
By teal_dx
#147851 I did the bat method when I was doing body work on my car:
http://civic-eg.com/viewtopic.php?t=31

here's a link to Tire Rack's tool for $259
http://www.tirerack.com/accessories/detail.jsp?ID=52