Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
By The_richie_88
#95234 I have a 92 civic eg, i bought it with a disc brake swap and i wanna buy new rotors etc, but i dont know if they are from a civic si, del sol , or integra. same with the front brakes.Any suggestions?.....but i think they have a wire for abs cause there is a wire just hanging from the trailing arm........... and if change the front to some tegs, would i have to change the pp valve?


Thanks!
User avatar
By VegasCivic
#95278 Trailing arms are universal. The rotor size is what you want. Use a measure to find out. If you change the fronts, it is only highly recomended that you swap the valve as well. It is not required. That is if you "pp" valve is the proportioning valve.
User avatar
By asianrob
#95365 all rear trailing arms are the same.

even the drums have same trailing arms.
By The_richie_88
#95551 Thanks! so if chaned my front brakes to ls or gsr brakes would it make a differnce? with stock porpotioning valve
User avatar
By asianrob
#95647 as far as the front brakes go yea. it should

the rear trailing arms you can just change out the drum to disc without having to change out the whole arm... but either way same trailing arms tho