Civic EG

Ok, i'm having a problem.
I'm pulling out the rear suspension, and i cannot get the bracket off the end of the parking brake cable. I have rear disc brakes, and the cable goes through a hole in the trailing arm, but the bracket that bolts to the brake caliper is too big to fit though.
Does anyone have a picture of how this comes apart?

Thanks for any help.

I disconnected my P brake cable from the P brake arm first and pulled it out through the trailing arm TOWARDS the drum/caliper.

Is this possible in your case? All you have to do is unscrew the rear of the center console and lift it up and you'll have access to the cables.

Thanks BAXTER. I guess I'll have to do that. Seems a lot of work to pull 6 foot of cable one way instead of 6" of cable the other way, but I guess that's the way to do it...

Yeah it only took us a minute or two, it just snakes along the underside. If you can jack it up it won't be a problem at all. I was pissed I forgot to take pics when I replaced my seized parking brake cables.

Sawing through those bad-boys with a hacksaw is no fun! Best of luck!