Civic-EG.com Forum 3.3.1

- Thu Aug 28, 2008 3:54 am #67534 I tried reading all over the Brakes section but i couldn't seem to find the answer to my question, and I don't want to jack somebody else's thread.

So my question is, does the 90-93 Integra have bigger front rotors/calipers than ours? If so, would it just be a straight swap? i.e. Just rotors and calipers. I just want to know what other parts I would need and if someone has done this I'd like to hear some feedbacks/tips/etc.

Thanks!
JM

- Thu Aug 28, 2008 4:05 pm #67588 3rd gen integra suspension parts bolt up to our 5th gen civic chassis.
2nd gen integra suspension parts bolt up to 4th gen civic chassis.

- Thu Aug 28, 2008 5:51 pm #67595 Thanks for the input.. Now I just need to test my luck at the pick-and-pull, since there's not a lot of 3rd gens there..

- Thu Aug 28, 2008 6:34 pm #67602 you can fit the rear disc brakes from the 90-93 on to our cars

on the front might be able to get away with just getting the spindle with no a-arms. but dont quote me on that.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Thu Aug 28, 2008 10:46 pm #67625 I'll keep that in mind, thanks Rob. But I'll look for a 3rd gen just to make it easy. I just wanted to have bigger rotors and calipers anyway.