Civic-EG.com Forum 3.3.1

- Tue Aug 12, 2008 7:49 am #65514 I would like to upgrade the brakes of my eg4 to 262mm (eg6).

My question is; would I run into any problems using ek4 hubs instead of eg6 ones? I.e. what are the differences?

Back in Holland...

- Tue Aug 12, 2008 4:37 pm #65565 I dont think you should have any problems. its pretty much the same thing.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Tue Aug 12, 2008 5:40 pm #65583 You will need to just make sure that when you buy new Rotors or pads that you buy EK ones just incase there is a difference in them.

As I know that there is a difference from EF and EH rotors and pads to that on the EGs.

Also as you will need to change the Hubs at the same time to accomedate the calipors you may need to change your drive shafts as I know they are slightly different too.

Built not bought - New build post is here!!!

http://www.civic-eg.com/viewtopic.php?t=19419

- Sun Dec 28, 2008 12:57 pm #85796 why not go for a 282mm upgrade dude? or is it hard to find teggy or lude calipers and carriers?