Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
User avatar
By teal_dx
#338686 Ive heard of using an air chisel/hammer:
https://www.youtube.com/watch?v=IDfqx1lfVRk

I have never tried that method but I have used a torch to heat up the parts, which can help loosen them up.
By Rabble
#338717 Attempted more heat and using a hammer. No luck. I don't understand why it will swivel without any effort, yet refuses to come out. Any ideas?
By austenjanzen
#343355 didn't have this problem but mine was seized
actually yesterday I did it march 12th 2014

my guess is it snapped in 2 pieces and seized my best guess is keep spraying WD-40 in there and heating it up gunna take a lot of heat and banging it with a hammer