Civic-EG.com Forum 3.3.1

- Mon Jul 02, 2012 5:57 am #309925 Hello friends
Does anybody knows that a 4th-gen Accord (CB7 or ...) brake booster and master cylinder fits inside EG or not? Is it a good idea to do this swap?

- Wed Jul 04, 2012 4:43 am #310090 i wanna say no, but i could be wrong. it would be easier to swap in a Brake booster and Master cylinder from an 94-01 integra or a higher model 92-95 civic. just make sure you are using the right one ABS or NON ABS and you should be fine.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Wed Jul 04, 2012 7:59 am #310105 ^^ you are correct this is not possible. accord stuff and civic integra stuff will swap around easy. You will want either a MC from and EX or SI, EX is 7/8 and the SI is 15/16 the integra one you could go up to a 1" but it might be overkill for stock size rotors and brake calipers.

95 EJ1 BG33P - RC
95 EJ2 BG33P - DRC

Coupe Crew #20