Civic-EG.com Forum 3.3.1

- Wed Oct 12, 2011 6:34 pm #277411 so i dont have the tool that twist and compresses the rear brake piston the one that has the + on it , is there anyway to do this with out the tool

- Wed Oct 12, 2011 7:15 pm #277421 I used a sturdy pair of needle nose pliers, a file... anything that will slide into the grooves will work fine.

A little piss ant like you isnt worth being banned over.

Yea he has a bad habit of being overly sarcastic.. .. at the wrong times..

- Thu Oct 13, 2011 12:57 am #277489 i used a big flat head screw driver , just turn it between the groves

*my builds* gotta love a nasty ass coupe with a good forum on your back

http://civic-eg.com/viewtopic.php?t=17925
http://civic-eg.com/viewtopic.php?t=16920
#2 COUPE CREW MEMBER

- Thu Oct 13, 2011 7:17 am #277575 As above I do the same. As a top tip loosen the cap off your brake fluid resevour as this will help reduce presure when winding the piston back in

Built not bought - New build post is here!!!

http://www.civic-eg.com/viewtopic.php?t=19419

- Thu Oct 13, 2011 5:32 pm #277626

As above I do the same. As a top tip loosen the cap off your brake fluid resevour as this will help reduce presure when winding the piston back in

x2